HOME PRODUCTS Protection,Automation & Control Automation

PCS-9884 Managed Ethernet Switch Supporting HSR and PRP
  • The PCS-9884 is a 4U 9.5” managed Ethernet switch adopting modularized conception for severe environments. It supports high data transmission rate to meet the increasing requirements in substation automation system (SAS), networked control system (NCS), distributed control systems (DCS), industrial system, etc. Especially, it supports HSR (High-AvailabilitySeamless Redundancy) and PRP (Parallel Redundancy Protocol) network architecture.

  • Ethernet Switching Flow Control VLAN Ring Network Multicast Port Security File Management Management Method
    • 10/100Mbps self-adaptive electrical Ethernet ports

    • These ports are compatible with the 10BASE-T/100BASETX standard and are self-adaptive for crossover and straightthrough network cable. MDI/MDIX automatic identification is supported.

    • 100Mbps fiber port adopting SFP socket

    • The SFP transceiver complying with IEEE 802.3 100BASEFX standard can be hot plugged.

    • The switching mode is non-blocking store and forward

    • Support of IEEE 802.3x flow control

    • Network storm suppression

    • The upper rate limit of broadcasting/multicasting/addressingfailure message is configurable.

    • Port rate limitation

    • The message forwarding rate and burst rate of each port is configurable.

    • Port mirror

    • Monitoring the inflow/outflow data of all the ports can be realized through one designed port.

    • Link aggregation

    • Link aggregation can be based on port number, MAC address, etc.

    • Quality of service (QoS) control

    • The message priority control based on IEEE 802.1p is supported, including the strict priority strategy and the weighted priority strategy.

    • Support of VLAN based on port

    • Support of VLAN based on IEEE 802.1Q

    • Support of overlapped VLAN configuration

    • Support of STP (IEEE 802.1D), RSTP (IEEE 802.1w) and MSTP ring network protocol so as to fast switch to a backup link in case of link failure

    • Support of High-Availability Seamless Redundancy (HSR) protocol to realize self-healing and zero-packet-loss in ring network architecture

    • Support of Parallel Redundancy Protocol (PRP) to realize transmission standardization for double network architecture

    • Support of VLAN multicast based on IEEE802.1Q

    • Support of static multicast management based on MAC address

    • Support of IGMP snooping dynamic multicast management

    • Support of port security certification based on static MAC address

    • Support of port security certification based on IEEE 802.1X

    • Support of network security protocol based on SSL/SSH

    • Support of Telnet function

    • Free of DoS attack

    • Support of security log and operation log

    • Support of uploading and downloading of Ethernet switch configuration file

    • Support of PC downloading of Ethernet switch log and event file

    • Support of WEB Server, Telnet and CLI

    • Support of SNMP V1/V2C/V3

    • Support of RMON

    • Support of IP conflict detection

    log on
    Previous:PCS-9882XD Managed Ethernet Switch Next:MUX-2M/64 Communication Interface Back to list

    © Copyright NR Electric Co., Ltd.
    All Rights Reserved.

    About us Service & Support Company Training Contact Us

    Solutions Power Generation Transmission System Distribution Network Industrial Consumer

    Products Protection,Automation&Control FACTS HVDC Renewable & Microgrid