PCS-9882 Ethernet Switch-NR Electric Co. Ltd

HOME PRODUCTS Protection,Automation & Control Automation

SERVICES NEWS EVENT CALENDOR CONTACT US: PCS-9882 Ethernet Switch

The PCS-9882 series managed Ethernet switches are designed for severe environments. It supports high data transmission rate to meet the increasing requirements in substation automation system (SAS), networked control system (NCS), distributed control systems (DCS), industrial system, etc.

Ethernet Switching Flow Control Delay Compensation VLAN Management Method Ring Network Multicast Port Security Clock Synchronization File Management

10/100Mbps self-adaptive electrical Ethernet ports
These ports are compatible with the 10BASE-T/100BASE-TX standard and are self-adaptive for crossover and straight-through network cable. MDI/MDIX automatic identification is supported.
10/100/1000Mbps self-adaptive electrical Ethernet ports
These ports are compatible with the 10BASE-T/100BASE-TX/100BASE-T standard and are self-adaptive for crossover and straight-through network cable. MDI/MDIX automatic identification is supported.
100Mbps fiber port adopting SFP socket
The SFP transceiver complying with IEEE 802.3 100BASE-FX standard can be hot plugged.
10/100/1000Mbps fiber port adopting SFP socket
The SFP transceiver complying with IEEE 802.3 1000BASE-SX (1.25GBd) standard can be hot plugged.
The switching mode is non-blocking store and forward.
Support of IEEE 802.3x flow control.

Network storm suppression

The upper rate limit of broadcasting/multicasting/addressing-failure message is configurable.

Port rate limitation

The message forwarding rate and burst rate of each port is configurable.

Port mirror

Monitoring the inflow/outflow data of all the ports can be realized through one designed port.

Link aggregation

Link aggregation can be based on port number, MAC address, etc.

Quality of service control

The message priority control based on IEEE 802.1p is supported, including the strict priority strategy and the weighted priority strategy.

Flow limitation (PCS-9882PD/SD only)

The upper forwarding and burst rate limits of each port can be set based on MAC address or protocol type.

Support of delay compensation based on GOOSE message
Support of delay compensation based on SMV message

Support of VLAN based on port
Support of VLAN based on MAC address
Support of VLAN based on protocol
Support of VLAN based on IP address
Support of VLAN based on IEEE 802.1Q
Support of overlapped VLAN configuration
Support of VLAN tag insertion, modification and deletion
Support of GARP VLAN registration protocol
Support of QinQ VLAN

Support of WEB Server, Telnet and CLI
Support of SSH/SSL
Support of IEC 61850 MMS remote monitoring
Support of SNMP V1/V2C/V3.
Support of RMON
Providing of alarm output contact and block output contact via relay
Support of IP conflict detection
Support of LLDP

Support of STP (IEEE 802.1D), RSTP (IEEE 802.1w) and MSTP ring network protocol so as to fast switch to a backup link in case of link failure
Support of NR-Ring private protocol with faster ring network recovery speed
Support of the dedicated ring network protocol, which is able to minimize network storm when cooperating with mixed ring and non-ring Ethernet switches
Support of MRP protocol

Support of VLAN multicast based on IEEE802.1Q
Support of static multicast management based on MAC address
Support of GMRP dynamic multicast management
Support of IGMP snooping dynamic multicast management.

Support of port security certification based on static MAC address
Support of port security certification based on IEEE 802.1X
Support of RADIUS Server to cooperate with IEEE 802.1X for remote and local certification
Support of network security protocol based on SSL/SSH
Support of quantitative limitation on MAC address learning
Support of Telnet function
Free of DoS attack
Support of ACL function (PCS-9882PD/SD only)
Support of security log and operation log